*Energy consumption may vary significantly with ambient environmental temperature, frequency of use, filtration settings and the use of other hot tub features including temperature controls, circulating jets, and waterfalls. Test procedures and data collection is based on the test method for Portable Electric Spas stipulated in Section 1604, Title 20, California Code of Regulations, amended on December 3, 2008. CEC testing parameters require that all units listed are tested in a third party or CEC approved laboratory, under a controlled environment with an ambient air temperature of 60(15.6 ℃)±313℉ and hot tub water temperature of 102(38.9 ℃)±213℉, with the hot tub cover on for a continuous 72 hours, and in compliance with ANSI/APSP/ICC-14 2011 and IAPMO filtration and water turnover requirements.
| Warranty Type | Description | Standard Warranty | Extended Warranty |
|---|---|---|---|
| SHELL | CSMI warrants against water loss (through the spa shell) due to workmanship or manufacturing defects for the lifetime of the spa shell. | Lifetime | Lifetime |
| ACRYLIC SURFACE | CSMI warrants the interior surface material of the spa shell against blistering or delaminating for a period of five years. (See Surface Warranty in the Exclusions portion of this document). | 5 Years | 5 Years |
| HEATER | CSMI warrants, the heater, as originally installed, against defects in material and workmanship, for a period of two years. | 2 Years | 5 Years |
| PUMP | CSMI warrants the pump(s) due to motor failure or malfunction due to defects in material and workmanship for a period of two years. Pump shaft seal is covered for 1 year against defect in material and workmanship. The warranty includes pump seal (part only) necessary for repair. Damage resulting from a neglected leaking shaft seal is not covered under warranty. This includes but is not limited to bearing seizure, end bell failure, start switch failure, impeller failure and capacitor failure. It is the responsibility of the customer to report shaft seal failure before further damage can occur. | 2 Years | 5 Years |
| CONTROL | CSMI warrants the control system (pack and keypad) against malfunction due to defects in material and workmanship for a period of two years | 2 Years | 5 Years |
| LEAK | CSMI warrants the factory installed plumbing against water loss due to defects in material and workmanship for a period of two years, with conditional exclusions. This warranty specifically covers leaks from the jet fittings, drain fittings, internal plumbing, filter canister, mechanical float water gauge and light lens. | 2 Years | 5 Years |
| LED LIGHTING | CSMI warrants the optional LED lighting to be free from defects in material and workmanship for a period of two years. | 2 Years | 2 Years |
| SYNTHETIC CABINET | CSMI warrants the Synthetic cabinet to be free from defects in material and workmanship for a period of two years. This warranty specifically covers the cabinet’s structural integrity (excluding surface stain or color). The cosmetic finish is warranted to be free from defects at the time of initial delivery to the original consumer purchaser. Fading and weathering of the surface will naturally occur over time and are not considered warrantable defects. Due to thermal expansion properties of Polyethylene material, contraction and expansion in synthetic cladding can occur over varying temperatures. However, under no circumstances either of these conditions can be construed as warping from its original form. Bowing of the spa cabinets due to temperature variations and extreme conditions are considered normal and are not covered under the spa limited warranty. Normal wear and tear and discoloration are not considered manufacturing defects and are not warrantable. | 2 Years | 5 Years |
| FRAME | CSMI warrants the spa structure frame to be free from defects in material and workmanship for a period of two years. | 2 Years | 5 Years |
| PURIFICATION SYSTEM | CSMI warrants the purification system to be free from defects in material and workmanship for a period of two years. This covers the O3 One Advanced system, and UV Sanitizer. | 2 Year | 2 Years |
| ENTERTAINMENT SYSTEM | CSMI warrants the factory installed entertainment system (power supply, speakers, Wi-Fi) to be free from defects in material and workmanship for a period of two years. This warranty specifically excludes water damage. | 2 Years | 2 Years |
| OTHER COMPONENTS | Jet inserts, filter lid & lock ring are warranted against malfunction due to defects in material and workmanship for a period of two years (these parts are a part replacement only/no labor coverage). Failure to maintain water chemistry and/ or neglect in cleaning the stainless-steel components could escalate the chemical attack on the stainless. Due to environmental conditions out of our control, we are unable to warranty discolorations or corrosion on stainless steel parts. The following items are not included in this limited warranty but are warranted to be free from defects in material or workmanship at the time of delivery to the original consumer purchaser from the dealer: Filter cartridge, dirty filters, loose unions, pinched or misaligned gaskets, closed water valves, closed jets, fuses, expired light bulbs, disconnected power cords, 24” waterfall, & sacrificial anode | 2 Years | 2 Years |
Coast Spas hot tubs are a popular choice for those looking to enhance their outdoor living experience. These high-quality hot tubs are designed with advanced technology and craftsmanship, providing users with a luxurious and comfortable spa experience. Coast Spas offers a range of models, each with unique features and customizable options to fit any lifestyle and budget. With innovative hydrotherapy systems, energy-efficient components, and durable materials, Coast Spas hot tubs are built to last and provide years of enjoyment. Whether you're looking to unwind after a long day or entertain friends and family, a Coast Spas hot tub is the perfect addition to any backyard oasis.
Coast Spas Standard Covers
4" Taupe WeatherShield Cover
4" Mahogany WeatherShield
4" Grey WeatherShield
4" Black WeatherShield Cover
5" Taupe WeatherShield
5" Mahogany WeatherShield
5" Grey WeatherShield
5" Black WeatherShield
Coast Spas Steps
Coast Guard 2-Tier Spa Step – Grey
Coast Guard 2-Tier Spa Step – Black
Coast Spas Cover Lifter
Cover Mate Easy
Cover Mate 1
Cover Mate 3
Coast Spas Premium Package
Full Foam Insulation XL
The best insulation period. The entire cavity is filled with expanding urethane foam, giving the ultimate in heat retention and protection for internal components.
Aromatherapy - Fragrance Injection System
With a push of a button add a burst of fragrance into your Hot Tub. A large variety of Spa scents are available to load into your Hot Tub Aromatherapy Injector. This new feature adds another dimension to your Hot Tub experience.
WiFi Remote Control
Adjust water temperature, set filter cycles, activate jets, toggle lights on and off and even sync your spa clock with a touch of a button. This new and innovative application gives you remote control of your Coast Spa® via your smartphone, tablet or smart-device from anywhere in the world. All you need is a internet connection and you can see exactly what your spa is doing at any time. Your Hot tub must be installed within range of your home wifi network.
O3One Ozone
O3 One Advanced Plasma Discharge Ozone produces a higher concentration of ozone (more ppm) than an average ozone system. To remove microscopic organic contaminants you need an ozonator. Ozone is one of the most powerful oxidizers known today. Ozonators produces energetic oxygen or “ozone” that oxidizes foreign contaminants.
2024 Patio Omega Lounge ULP - 12 Jets Features
Shiatsu Massage Nodules
These tiny massage nodules are formed right into your spas acrylic allowing for water to move between your skin and the acrylic surface. The size and spacing of these ingenious nodules create a unique hydrotherapy experience that is more like resting on a cloud as our massage jets melt away the tension in your muscles.
50 sq.ft Pressurized Filtration System
In North America commercial establishment are required to have a closed pressurized filtration system on any public pool or Hot Tub. Not only is it more efficient than a skim filtration system but it also removes the dirty filter canisters from the bathing area. Without a pressurized system, once the water flow to the filter subsides, the debris that was caught in the filter is free to float back into the spa and re-contaminate the water. This is a commercial-grade, pressurized filtration system with the filter canister completely removed from the bathing area and coupled with an oversized skimmer.
Digital Control Panel
Digital Hot Tub Controls that are waterproof and extremely durable . The user interface is easy to navigate allowing you to control all the major components of your Hot Tub with ease.
Plug and Tub - Powered by 110v Household Outlet (North America)
Plug your Hot Tub into a standard household 110V outlet in North America. Built in GFCI (Ground Fault Circuit Interrupter). No need to install dedicated wiring, simply fill with water, plug in and turn on. Portable and perfect for areas that no other Hot Tub can go.
Coast Spas Standard Features
Foam Core Insulation
Add additional Foam to insulate your Hot Tub and conserve energy usage. This foam package partically fills the space between the inside of the cabinet to the inside wall of the spa acrylic. For the ultimate insulation choose the Full Foam insulation option.
MultiColor 3” Safety Light
Customizable large 3” multicolor light illuminates your spa at night and allows safety and comfort for entering and exiting your Spa in low light conditions.
Coast Spas Comforts
Plush Headrests
Our luxurious headrests allow you to enjoy the ultimate in comfort while in your Coast Spa. Cradling your head allows you to release the tension from your neck maximizing the benefit of your hydrotherapy.
_x320.png?v=39722330598821968401706122452)
Anti-Slip Textured Floor
Allows for ease of entrance and exit and provides secure freedom of movement while in your Spa.
Multi-Level Seating
Allows for people of all heights to find a comfortable spot in the Spa. Raised seating is ideal to be used as a "cool down seat" by elevating your heart out of the water you're able to cool down quickly and enjoy more time in our Spa.
Ergonomic Seating
Using the latest in research and development all seating is designed to cradle your body and allow for the optimal jet placement.
Programmable Filtration
Instead of using a dedicated pump for filtration that runs 24 hours per day 365 days a year, these jet pumps filter the Spa water at user defined intervals using the power of full sized jet motors to quickly filter the Spa in a mere fraction of the time that it would take a small circulation pump to do the same job. At the end of the day, this filtration method uses less power to do a superior job of filtering the Hot Tub. Programmable filtration also allows you to have your Spa filtering when you wish, the Spa does not need to run while you are sleeping or entertaining.
Non-Float Lounger
Our ergonomically designed non-float lounger allows you to put your feet up while enjoying a complete massage and limits the ability for you to "float out" of your seat.
Hydrotherapy
Coast Spas Separate Filtration System
Filters
| Model Specs | |
|---|---|
| Seating Capacity | 4 Seats |
| Pump Power (hp) | 1.5 HP/ 3 BHP |
| Dimensions (cm/in) | 212 x 167.6 x 76.2 cm / 83.5" x 66" x 30" |
| Jets | 12 Jets |
| Filled Weight (kg/lbs) | 1008 kg / 2222 lbs |
| Dry Weight (kg/lbs) | 202 kg / 445 lbs |
| Water Capacity (L/gal) | 806 L / 213 gal |
| Electrical (V) | 110 V (Plug and Tub) |
| Cover Specs | |
|---|---|
| Material | Weather-shield Fabric Cover |
| Dimensions (cm/in) | 168 x 212 cm / 66" x 83.5" |
| Slope | 4" > 2.5" Taper |
| Foam Density | 2 lbs/cubic feet |
| R Factor | Up to R15 insulation rating |
| Certifications | Society for Testing & Materials Standard (ASTM) Certified |
